Penguin Chillers

Cold Therapy Chiller & Tub

Extended Warranty:

Current Estimated Lead Time: 7-10 Business Days

  • Plug & Play – No tools required
  • 7,500 BTU/hr  –  3/4HP chiller
  • 150 micron washable / reusable filter
  • Quick Connect hoses
  • 1 Year Product Warranty
  • Proudly made in the USA
  1. 100gal tub 53″ x 31″ x 26″ external / 47″ x 25″ x 26″ internal
  2. Attached filter canister with 150 micron washable / reusable filter
  3. Inline Screen – coarse filter to catch hair and large debris prior to chiller
  4. 3/4HP Cold Therapy Chiller with built in pump
  5. Quick connect hoses
  • Cold Therapy Made Easy Whether you're a newcomer or a cold therapy enthusiast, the primary draw is the health benefits, not the effort of hauling ice.
  • Effortless Cold Maintenance: Our chiller eliminates the need for constant ice replenishment, making it less of a chore and more of a consistent, hassle-free practice.
  • Iceless Baths for More Frequent Use: Transform your ice bath into an effortless, iceless experience, encouraging more regular and efficient use.
  • Optimal Temperature Range: The chiller can cool water to low 40°F and even high 30°F under appropriate conditions.
  • Influence of Environment on Performance: Ambient temperatures and direct sunlight largely affect your tub's warmth. Minimizing exposure improves the chiller's effectiveness.
  • Achievable Temperatures: Expect to reach low to mid 40°F, even in full sunlight or less-than-ideal conditions, by reducing external heat sources.

- Monthly operating cost: Approximately $15-$25 at $0.12/KWh.

- Compressor and fan activate only when cooling is needed; they shut off once the water hits the set temperature, leaving only the low wattage pump running.

Benefits of continuous operation:

- Cold water inhibits bacteria growth, reducing slimy walls and maintenance needs.

- Maintains water cleanliness longer, requiring less frequent changes and minimal sanitizer use (chlorine/hydrogen peroxide, etc.).

- Regular use negates significant power savings; any heat gain during "off" periods needs removal upon restart, potentially saving only $1-$3/month but increasing water and filter change frequency.

- Power cycling adds wear to the pump, the most vulnerable at startup, thereby potentially reducing its lifespan.

  • 3/4HP High Efficiency Chiller
  • 56 dBA (fairly quiet)
  • 110 – 120 Volts / 450 Watts / 3.9 Amps
  • 14”W x 20”D x 12”H
  • 52 Pounds
  • Built in Pump
  • 10′ power cord with GFCI protection
  • Rain Proof* (*disconnect chiller and drain completely when ambient temps are freezing or below to prevent damage to chiller)
  • 1 Year Product Warranty
  • Proudly made in the USA

You may also like

Recently viewed