Halotherapy Solutions

HaloGX™ PRO

$4,750.00 $4,900.00

Ideal for a smaller salt room or salt chamber

In response to the coronavirus, more and more spas are creating smaller, more personalized salt room and cave experiences. We have also adapted and updated our technology to introduce the HaloGX™ PRO.
The HaloGX™ PRO produces the smallest particles in the industry and uses the newest hybrid methods, incorporating both the mill technology and the cyclone technology.

  • Great for rooms up to 150+ square feet
  • Engineered with new compressed air technology for the smallest, micron-sized salt particles in the industry.
  • Uses less salt per session than standard Halogenerators but with the same efficacy
  • Quiet
  • Very easy to operate
  • Very easy to clean
  • Includes “turbo” feature to increase salt levels if desired
  • Low power consumption 50W, 110/230V, 50/60Hz
  • Lifetime warranty
  • Perfect size: 26.1 x 8.3 x 6.6 (inches)
  • Optimized salt particle size and distribution for maximum effectiveness using our proprietary SaltPerfect™ technology

Dimensions
Height 24.5″ (662mm)
Width 8.3″ (210mm)
Depth 6.1″ (155mm)
Weight 16.75 lbs. (7.6 kg)

Power requirements
110/230 V
50/60 Hz
48W

Different plugs are available for country-specific
installation.
Advise during the order process.

All professional-grade halogenerators are installed outside the salt room to ensure the flow of fresh air instead of circulating the same air in the room or cabin for 25-40 minutes.

1. Cut a rectangular opening of 2.165 x 4.33 inches (55 x 110 mm) in size into the wall of the salt room approximately 60 inches
(1.5m) from the ground.
Use the provided extension sleeve for thicker walls.

2. Position the Halo-GX generator into place and fasten it with (2) Phillips-head Screws

3. Install the scoop on the inner wall of the salt room

4. Connect the plug to an electrical outlet

In halotherapy, the optimal size of salt particles generated by a halogenerator is crucial in determining the effectiveness of the therapy.
Generally, salt particles in the range of 0.1-3.0 microns (often referred to as respirable particles) are considered most effective for reaching the deeper parts of the lungs.

  • Not easily visible to the naked eye
  • Do not irritate the lungs
  • Minimal waste
  • Deep penetration
  • Substantially better results

As the charts show in the image above, Halotherapy Solutions' halogenerators are industry leaders.

  • Over 73% of particles that are smaller than 0.51 µm
  • Over 94% of particles that are smaller than 1.1 µm in size.
  • Less than 0.16% unused residue, which consists of particles larger than 5 µm. This results in minimal waste and the most effective salt therapy.

You may also like

Recently viewed